Wannan inji kayan aiki da aka musamman amfani da aiki cylindrical zurfin rami workpieces, kamar spindle rami na inji kayan aiki, daban-daban inji na'ura mai aiki da karfin ruwa cylinders, Silinda cylindrical ta ramukan, makafi ramukan da tako ramukan, da dai sauransu The inji kayan aiki ba zai iya kawai gudanar da hakowa da kuma. m, amma kuma mirgine sarrafa, da kuma ciki guntu Hanyar da ake amfani da lokacin hakowa. Gidan gadon injin yana da ƙarfi mai ƙarfi da ingantaccen riƙewa. Kewayon saurin igiya yana da faɗi, kuma tsarin ciyarwa yana gudana ta hanyar injin AC servo, wanda zai iya biyan bukatun matakai daban-daban na sarrafa rami mai zurfi. Ana ƙara mai da mai kuma kayan aikin yana ƙarfafa ta na'urar ruwa, kuma nunin kayan aikin yana da aminci kuma abin dogaro. Wannan kayan aikin inji samfurin samfuri ne, kuma ana iya samar da samfuran nakasu iri-iri bisa ga bukatun abokin ciniki.
TS2163 rami mai zurfiinji kayan aiki ne mai mahimmanci ga masana'antu waɗanda ke buƙatar daidaito da inganci. Fasaha ta ci-gaba, sauƙin amfani, da ƙaƙƙarfan gini sun sa ya zama kyakkyawan zaɓi ga masana'antun da ke neman ƙara ƙarfin samarwa. Ko masana'anta hadaddun aka gyara ko manyan-sikelin samarwa, TS2163 shine jagora a fasahar hako rami mai zurfi.
Babban sigogi na fasaha:
| BAYANI | DATA FASAHA | |
| Iyawa | Range drilling dia | ø40-ø120mm |
| Max. kasala dia | mm 630 | |
| Max, m zurfin | 1-16m | |
| Range trepanning Dia | ø120-ø340mm | |
| Kayan aiki manne dia.range | ø 100-ø800mm | |
| sandal | Tsayi daga cibiyar spindle zuwa gado | mm 630 |
| Spindle bore dia | ku 120mm | |
| Taper na dunƙule dunƙule | ø140mm, 1:20 | |
| Matsakaicin saurin igiya | 16-270r/min 12 iri | |
| Akwatin hakowa | Spindle bore dia. na Drlling box | ku 100mm |
| Taper na sandal bore (akwatin hakowa) | ø120mm, 1:20. | |
| Matsakaicin saurin spindie (akwatin hakowa) | 82-490r/min 6 iri | |
| Ciyarwa | Matsakaicin saurin ciyarwa (marasa iyaka) | 5-500mm/min |
| Gudun tafiya mai sauri | 2m/min | |
| Motoci | Babban wutar lantarki | 45 kW |
| Akwatin hako wutar lantarki | 30kW | |
| Na'ura mai aiki da karfin ruwa motor | 1.5kW.n=1440r/min | |
| Ƙarfin mota mai sauri | 5.5kW | |
| Ciyar da wutar lantarki | 7.5kW (servo motor) | |
| Cool motor iko | 5.5kWx3+7.5kWX1 | |
| Wasu | Faɗin dogo na jagora | 800mm |
| Matsa lamba na tsarin sanyaya | 2.5MPa | |
| Gudun tsarin sanyaya | 100,200,300,600L/min | |
| Matsakaicin aiki don tsarin na'ura mai aiki da karfin ruwa | 6.3MPa | |
| Kyautar mai sanyaya mai girma max. karfi axial | 68kN ku | |
| Oil mai sanyaya kyauta max. preload don workpiece | 20kN | |
Lokacin aikawa: Nuwamba-19-2024