TGK25/TGK35 CNC zurfin rami m da scraping inji
Amfani da kayan aikin injin
● Gudanar da jujjuyawa yana sa ƙarancin aikin aikin ya kai Ra0.4.
Fasahar birgima mai zurfin rami nau'in nau'in aiki ne wanda ba yankewa ba, ta hanyar nakasar filastik, sararin da ke ciki na iya isa ga rashin ƙarfi da ake buƙata ta wurin aikin.
Ingantattun fa'idodin birgima:
● Haɓaka ƙaƙƙarfan yanayi, roughness na iya kai ga Ra≤0.4μm.
● Daidaitaccen zagaye, elpticity na iya kaiwa ≤0.03mm, coaxiality ≤0.06mm.
● Inganta taurin saman, kawar da nakasar damuwa, da ƙara taurin ta HV≥4 °.
● Akwai saura Layer damuwa bayan sarrafawa. Inganta ƙarfin gajiya da kashi 30%.
● Inganta ingancin dacewa, rage lalacewa da kuma tsawaita rayuwar sassan, amma farashin sarrafawa na sassan ya ragu.
Daidaitawa
● A surface roughness na workpiece m≤Ra3.2μm.
● Roughness na workpiece mirgina surface≤Ra0.4μm.
● Cylindricity na workpiece aiki≤0.027/500mm.
● Ƙwararren sarrafa kayan aiki≤0.02/100mm.
Babban Ma'aunin Fasaha
| Iyalin aikin | TGK25 | TGK35 |
| Kewayon diamita mai ban sha'awa | Φ40 ~ 250mm | Φ40 ~ 250mm |
| Matsakaicin zurfin zurfi | 1-9m | 1-9m |
| Kewayon ƙulla kayan aiki | Φ60 ~ 300mm | Φ60 ~ 450mm |
| Bangaren spinle | ||
| Tsayin tsakiya na Spindle | mm 350 | mm 450 |
| Ban sha'awa akwatin bar | ||
| Taper rami a gaban ƙarshen sandar | Φ100 1:20 | Φ100 1:20 |
| Matsakaicin saurin (mara taki) | 30 ~ 1000r/min | 30 ~ 1000r/min |
| Bangaren ciyarwa | ||
| Matsakaicin saurin (mara taki) | 5-1000mm/min | 30 ~ 1000r/min |
| Gudun motsi mai sauri na pallet | 3m/min | 3m/min |
| Bangaren motar | ||
| Ƙarfin mota na akwatin mashaya mai ban sha'awa | 60kW | 60kW |
| Na'ura mai aiki da karfin ruwa famfo motor | 1.5kW | 1.5kW |
| Motar motsi mai sauri don babban tashin hankali | 4 kW | 4 kW |
| Ciyar da wutar lantarki | 11 kW | 11 kW |
| Mai sanyaya wutar lantarki | 7.5kWx2 | 7.5kWx3 |
| Sauran sassa | ||
| Matsa lamba na tsarin sanyaya | 2.5 MPa | 2.5 MPa |
| Gudun tsarin sanyaya | 200, 400L/min | 200, 400, 600L/min |
| Matsalolin aiki na tsarin hydraulic | 6.3MPa | 6.3MPa |
| Matsakaicin ƙarfafa ƙarfin mai amfani da mai | 60kN ku | 60kN ku |
| Magnetic SEPARATOR kwarara kwarara | 800L/min | 800L/min |
| Matsi jakar tace yawan kwarara | 800L/min | 800L/min |
| Madaidaicin tacewa | 50 μm | 50 μm |