TGK25 / TGK35 CNC bolongan jero boring lan mesin scraping
Panggunaan alat mesin
● Processing Rolling ndadekake roughness saka workpiece tekan Ra0.4.
● Deep bolongan Processing teknologi rolling jenis Processing non-nglereni, liwat deformasi plastik, lumahing kothong utama bisa tekan roughness lumahing dibutuhake dening workpiece.
Tambah keuntungan saka rolling:
● Ngapikake roughness lumahing, roughness Sejatine bisa tekan Ra≤0.4μm.
● Roundness bener, ellipticity bisa tekan ≤0.03mm, coaxiality ≤0.06mm.
● Ngapikake atose lumahing, ngilangke deformasi kaku, lan nambah atose dening HV≥4 °.
● Ana lapisan kaku residual sawise Processing. Ngapikake kekuatan lemes kanthi 30%.
● Ngapikake kualitas pas, nyuda nyandhang lan ngluwihi umur layanan saka bagean, nanging biaya Processing bagean wis suda.
Precision
● Ing roughness lumahing workpiece boring≤Ra3.2μm.
● Roughness saka workpiece rolling surface≤Ra0.4μm.
● Cylindricity saka workpiece Processing≤0.027 / 500mm.
● Workpiece Processing roundness≤0.02 / 100mm.
Parameter Teknis Utama
| Ruang lingkup karya | TGK25 | TGK35 |
| Range diameteripun boring | Φ40～Φ250mm | Φ40～Φ250mm |
| ambane mboseni maksimum | 1-9m | 1-9m |
| Range clamping workpiece | Φ60～Φ300mm | Φ60～Φ450mm |
| Bagian spindle | ||
| dhuwur tengah Spindle | 350 mm | 450 mm |
| Bagian kothak bar sing mboseni | ||
| Lubang taper ing mburi ngarep spindle | Φ100 1:20 | Φ100 1:20 |
| Rentang kacepetan (stepless) | 30~1000r/min | 30~1000r/min |
| Bagean feed | ||
| Rentang kacepetan (stepless) | 5-1000mm / min | 30~1000r/min |
| Kacepetan obah cepet saka pallet | 3m/min | 3m/min |
| Bagian motor | ||
| Daya motor kothak bar sing mboseni | 60 kW | 60 kW |
| Daya motor pompa hidrolik | 1,5 kW | 1,5 kW |
| Motor cepet kanggo tensioner ndhuwur | 4 kW | 4 kW |
| Feed daya motor | 11 kW | 11 kW |
| Daya motor pump cooling | 7,5kWx2 | 7,5kWx3 |
| bagean liyane | ||
| Rated tekanan sistem pendingin | 2,5 MPa | 2,5 MPa |
| Aliran sistem pendinginan | 200, 400L / min | 200, 400, 600L / min |
| Rated tekanan kerja sistem hidrolik | 6.3MPa | 6.3MPa |
| Kekuwatan tightening maksimum saka aplikator lenga | 60kN | 60kN |
| Laju aliran pamisah magnetik | 800L / min | 800L / min |
| Laju aliran filter kantong tekanan | 800L / min | 800L / min |
| Presisi filtrasi | 50μm | 50μm |