TS2180 TS2280 TSQ2180 TSQ2280 ngebor bolongan jero lan mesin boring
Panggunaan alat mesin
Amben guideway adopts pindho persegi dowo guideway kang cocok kanggo mesin bolongan jero, karo kapasitas prewangan gedhe lan akurasi nuntun apik; guideway wis quenched lan dianggep karo resistance nyandhang dhuwur. Cocog kanggo proses mboseni lan gulung ing manufaktur alat mesin, lokomotif, galangan kapal, mesin batu bara, hidrolik, mesin tenaga, mesin angin lan industri liyane, saengga kekasaran benda kerja tekan 0,4-0,8 μm. Seri mesin mboseni bolongan jero iki bisa dipilih miturut workpiece ing wangun kerja ing ngisor iki:
1. Workpiece puteran, alat muter lan gerakan dipakani reciprocating.
2. Workpiece puteran, alat ora muter mung reciprocating gerakan dipakani.
3. Workpiece ora muter, alat muter lan gerakan dipakani reciprocating.
4. Workpiece ora muter, alat muter lan gerakan dipakani reciprocating.
5. Workpiece ora muter, alat muter lan gerakan dipakani reciprocating.
6. Workpiece puteran, alat muter lan gerakan dipakani reciprocating. rotasi, rotasi alat lan gerakan dipakani reciprocating.
Parameter Teknis Utama
| Ruang lingkup karya | |
| Kisaran diameteripun pengeboran | Φ40～Φ120mm |
| diameteripun maksimum bolongan boring | Φ800 mm |
| Range diameteripun nesting | Φ120～Φ320mm |
| ambane mboseni maksimum | 1-16m (ukuran saben meter) |
| Chuck clamping kisaran diameteripun | Φ120～Φ1000mm |
| Bagian spindle | |
| dhuwur tengah Spindle | 800 mm |
| Bolongan conical ing mburi ngarep kothak bedside | Φ120 |
| Lubang taper ing mburi ngarep spindle headstock | Φ140 1:20 |
| Kisaran kacepetan spindle saka headstock | 16~270r/min; 21 tataran |
| Bagean feed | |
| Range kacepetan feed | 10-300mm / min; stepless |
| Kacepetan obah cepet saka pallet | 2m/min |
| Bagian motor | |
| Daya motor utama | 45 kW |
| Daya motor pompa hidrolik | 1,5 kW |
| daya motor obah cepet | 5,5 kW |
| Feed daya motor | 7,5 kW |
| Daya motor pump cooling | 11kWx2+5.5kWx2 (4 klompok) |
| bagean liyane | |
| Jembaré rel | 1000 mm |
| Rated tekanan sistem pendingin | 2,5 MPa |
| Aliran sistem pendinginan | 200, 400, 600, 800L / min |
| Rated tekanan kerja sistem hidrolik | 6.3MPa |
| Aplikator lenga nduweni gaya aksial maksimal | 68kN |
| Kekuwatan tightening maksimum saka aplikator lenga kanggo workpiece | 20 kN |
| Bagian kothak pipa bor (opsional) | |
| bolongan Taper ing mburi ngarep kothak rod pengeboran | Φ100 |
| Lubang taper ing mburi ngarep kumparan kothak kumparan | Φ120 1:20 |
| Kisaran kacepetan Spindle saka kothak rod pengeboran | 82～490r/min; tataran 6 |
| Drill rod kothak motor daya | 30KW |
