TGK25/TGK35 CNC foramen altum taediosum et rasura machina
Machina instrumentum usus
Rolling processing makes the roughness of workpiece reach Ra0.4.
Foraminis profundus processus technologiae volubilis est quaedam processus non secans, per deformationem plasticam, superficies concava interiorem superficiem asperitatis quae ab workpiece requirit.
Augebat commoda volvens;
● Asperitatem superficiem emendare, asperitas plerumque Ra≤0.4μm attingere potest.
● Eruditio recta, ellipticitas attingere potest ≤0.03mm, coaxialitas ≤0.06mm.
● Superficiem duritiem emendare, deformationem accentus remove et duritiem auge per HV≥4°.
● Nulla sit amet accumsan lacus, in vestibulum ante. Improve lassitudine vires per XXX%.
● Emendare qualitatem aptum, extenuare induere et prorogare ministerium vitae partium, sed processus sumptus partium reducitur.
Precision
● Asperitas superficiei workpiece boring≤Ra3.2μm.
● asperitas operis volvens superficie≤Ra0.4μm.
● Cylindrica workpiece processus≤0.027/500mm.
● Workpiece processui roundness≤0.02/100mm.
Pelagus Technical Parametri
| Scopus operis | TGK25 | TGK35 |
| Amet diam rhoncus | Φ40～Φ250mm | Φ40～Φ250mm |
| Maxime odiosis profundum | 1-9m | 1-9m |
| Workpiece clamping range | Φ60～Φ300mm | Φ60～Φ450mm |
| Fusum pars | ||
| Fusum centrum altitudinis | 350mm | 450mm |
| Bar odiosis pars arca | ||
| Ante finem foraminis lychnus fusum | Φ100 1:20 | Φ100 1:20 |
| Celeritate range (stepless) | 30～1000r/min | 30～1000r/min |
| Pasce partem | ||
| Celeritate range (stepless) | 5-1000mm/min | 30～1000r/min |
| Celeritas movens ieiunium grabatum | 3m/min | 3m/min |
| Pars motor | ||
| Motor potentia odiosis arca archa | 60kW | 60kW |
| Hydraulica sentinam motricium | 1.5kW | 1.5kW |
| Ieiunium motricium in vertice tensioner | 4 kW | 4 kW |
| Potentia motricium feed | 11kW | 11kW |
| Sentinam motricium potentia refrigerationem | 7.5kWx2 | 7.5kWx3 |
| Aliae partes | ||
| Rated pressura refrigerandi ratio | 2.5 MPa | 2.5 MPa |
| Refrigerium ratio fluxus | 200, 400L/min | 200, 400, 600L/min |
| Rated opus pressura systematis hydrau | 6.3MPa | 6.3MPa |
| Maximam constringendi vim olei applicatoris | 60kN | 60kN |
| Magnetic separator rate fluxus | 800L/min | 800L/min |
| Pressura lapides sacculi filter influunt rate | 800L/min | 800L/min |
| Filtration praecisio | 50μm | 50μm |