TGK25/TGK35 CNC zakuya dzenje makina wotopetsa ndi kukanda makina
Kugwiritsa ntchito makina
● Kugudubuza processing kumapangitsa roughness wa workpiece kufika Ra0.4.
● Deep dzenje processing anagubuduza luso ndi mtundu wa sanali kudula processing, kudzera mapindikidwe pulasitiki, mkati dzenje pamwamba angafikire roughness pamwamba chofunika ndi workpiece.
Ubwino wowonjezera wa rolling:
● Kuwongolera roughness pamwamba, roughness kwenikweni akhoza kufika Ra≤0.4μm.
● Kuzungulira kolondola, elliptical imatha kufika ≤0.03mm, coaxiality ≤0.06mm.
● Limbikitsani kuuma kwa pamwamba, kuchotsani kupsinjika maganizo, ndikuwonjezera kuuma ndi HV≥4 °.
● Pali chotsalira cha nkhawa wosanjikiza pambuyo pokonza. Limbikitsani mphamvu ya kutopa ndi 30%.
● Kupititsa patsogolo ubwino wokwanira, kuchepetsa kuvala ndi kuwonjezera moyo wautumiki wa zigawozo, koma mtengo wokonza magawowo umachepetsedwa.
Kulondola
● Kuvuta kwa pamwamba kwa workpiece wotopetsa≤Ra3.2μm.
● Kuvuta kwa workpiece kugudubuza pamwamba≤Ra0.4μm.
● Cylindricity ya workpiece processing≤0.027/500mm.
● workpiece processing roundness≤0.02/100mm.
The Main Technical Parameters
| Kuchuluka kwa ntchito | TGK25 | TGK35 |
| Boring diameter range | Φ40～Φ250mm | Φ40～Φ250mm |
| Kuzama koboola kwambiri | 1-9m | 1-9m |
| Mtundu wa clamping wa workpiece | Φ60～Φ300mm | Φ60～Φ450mm |
| Chigawo cha spindle | ||
| Spindle center kutalika | 350 mm | 450 mm |
| Wotopetsa bar bokosi gawo | ||
| Bowo lotsekera kutsogolo kwa spindle | Φ100 1:20 | Φ100 1:20 |
| Speed Range (yopanda masitepe) | 30-1000r/mphindi | 30-1000r/mphindi |
| Gawo la chakudya | ||
| Speed Range (yopanda masitepe) | 5-1000mm / mphindi | 30-1000r/mphindi |
| Liwiro losuntha la mphasa | 3m/mphindi | 3m/mphindi |
| Gawo la injini | ||
| Mphamvu yamagalimoto ya bokosi lotopetsa la bar | 60kw pa | 60kw pa |
| Mphamvu yama hydraulic pump motor | 1.5 kW | 1.5 kW |
| Injini yothamanga kwambiri yamagetsi apamwamba | 4 kw pa | 4 kw pa |
| Dyetsani mphamvu zamagalimoto | 11kw pa | 11kw pa |
| Kuziziritsa pampu mphamvu yamagalimoto | 7.5kwx2 | 7.5kwx3 |
| Zigawo zina | ||
| Ovoteledwa kuthamanga kwa kuzirala dongosolo | 2.5 MPa | 2.5 MPa |
| Kuzizira dongosolo kuyenda | 200, 400L / min | 200, 400, 600L / min |
| Adavotera kuthamanga kwa hydraulic system | 6.3MPa | 6.3MPa |
| Pazipita kumangitsa mphamvu ya mafuta applicator | 60kn pa | 60kn pa |
| Kuthamanga kwa maginito olekanitsa | 800L/mphindi | 800L/mphindi |
| Kuthamanga kwa thumba lachikwama lothamanga | 800L/mphindi | 800L/mphindi |
| Kusefera mwatsatanetsatane | 50m mu | 50m mu |