CK61100 Horizontal CNC lathe

Sanjia CK61100 horizontal CNC lathe, the machine tool adopts a semi-enclosed overall protection structure. The machine tool has two sliding doors, and the appearance conforms to the ergonomics. The manual control box is fixed on the sliding door and can be rotated.

The machine tool adopts a semi-enclosed overall protection structure. The machine tool has two sliding doors, and the appearance conforms to the ergonomics. The manual control box is fixed on the sliding door and can be rotated.

All the drag chains, cables, and cooling pipes of the machine tool are running in the closed space above the protection to prevent the cutting fluid and iron chips from damaging them, and improve the service life of the machine tool. There is no obstruction in the chip removal area of ​​the bed, and the chip removal is convenient.

The bed is cast with a ramp and an arched door for backward chip removal, so that chips, coolants, lubricating oil, etc. are directly discharged into the chip removal machine, which is convenient for chip removal and cleaning, and the coolant can also be recycled.

Scope of work

1. Machine guide rail width————755mm

2. Maximum rotation diameter on the bed—–Φ1000mm

3. Maximum workpiece length (turning outer circle—–4000mm

4. Maximum workpiece rotation diameter on the tool holder–Φ500mm

Spindle

5. Spindle front bearing————-Φ200 mm

6. Shift type—————Hydraulic shift

7. Spindle through hole diameter————Φ130mm

8. Spindle inner hole front end taper——-Metric 140#

9. Spindle head specification—————-A2-15

10. Chuck size————–Φ1000mm

11. Chuck type———-Manual four-claw single-action

Main motor

12. Main motor power————30kW servo

13. Transmission type————–C-type belt drive

Feed

14. X-axis travel—————–500 mm

15. Z-axis travel—————–4000mm

16. X-axis fast speed—————–4m/min

17. Z-axis fast speed—————–4m/min

Tool rest

18. Vertical four-station tool rest———Electric tool rest

19. Tailstock type———–Built-in rotary tailstock

20. Tailstock spindle movement mode———–Manual

21. Tailstock overall movement mode———–Hanging pull