This machine tool is specially used for processing deep hole workpieces. It mainly uses the BTA method to process small diameter deep hole parts, and is particularly suitable for processing oil drill collars. The biggest structural feature of this machine tool is that the front side of the workpiece, close to the oiler end, is clamped by a double chuck, and the back side is clamped by a ring center frame.
Main technical parameters:
Working range
Drilling diameter range——————————————————————Φ30～Φ100mm
Maximum drilling depth————————————————————————6-20m (one specification for each meter)
Chuck clamping diameter range————————————————————Φ60～Φ300mm
Spindle part
Spindle center height————————————————————————350mm
Headstock spindle speed range————————————————————42～670r/min; 12 levels
Drill box part
Drill box front end taper hole————————————————————Φ100
Drill box spindle front end taper hole————————————————————Φ120 1:20
Drill box spindle speed range————————————————————82～490r/min ; 6 levels
Feeding part
Feeding speed range——————————————————————0.5-450mm/min; stepless
Panel fast moving speed————————————————————2m/min
Motor part
Main motor power——————————————————————30kW
Drill rod box motor power————————————————————30KW
Hydraulic pump motor power————————————————————1.5kW
Fast moving motor power————————————————————5.5 kW
Feed motor power——————————————————————7.5kW
Cooling pump motor power——————————————————————5.5kWx4 (4 groups)
Other parts
Guide rail width————————————————————————650mm
Cooling system rated pressure——————————————————2.5MPa
Cooling system flow——————————————————————100, 200, 300, 400L/min
Rated working pressure of hydraulic system——————————————————6.3MPa
The maximum axial force of the oiler————————————————68kN
The maximum tightening force of the oiler on the workpiece————————————————20 kN
Optional ring center frame
Φ60-330mm (ZS2110B)
Φ60-260mm (TS2120 type)
Φ60-320mm (TS2135 type)
Post time: Oct-26-2024