This machine is a deep hole processing machine that can complete the drilling, boring and trepanning of large-diameter heavy parts. During processing, the workpiece rotates at a low speed, and the tool rotates and feeds at a high speed. When drilling, the BTA internal chip removal process is adopted, and when boring, the cutting fluid is supplied from the boring bar to discharge the cutting fluid forward (head end) to remove the chips.
Main technical parameters:
Working range
Drilling diameter range————————————————————————Φ60～Φ180mm
Maximum boring diameter————————————————————————Φ1000mm
Nesting diameter range——————————————————————Φ150～Φ500mm
Maximum boring depth————————————————————————1-20m (one specification per meter)
Chuck clamping diameter range——————————————————————Φ270～Φ2000mm
Spindle part
Spindle center height—————————————————————————1250mm
Conical hole at the front end of the headstock————————————————————————Φ120
Conical hole at the front end of the headstock spindle——————————————————————Φ140 1:20
Headstock spindle speed range——————————————————————1～190r/min; 3 gears stepless
Feeding part
Feeding speed range————————————————————————5-500mm/min; stepless
Panel fast moving speed——————————————————————2m/min
Motor part
Main motor power————————————————————————75kW
Hydraulic pump motor power———————————————————————1.5kW
Fast moving motor power——————————————————————7.5 kW
Feed motor power——————————————————————————11kW
Cooling pump motor power————————————————————————11kW+5.5kWx4 (5 groups)
Other parts
Guide rail width——————————————————————————1600mm
Cooling system rated pressure————————————————————2.5MPa
Cooling system flow————————————————————————100, 200, 300, 400, 700L/min
Rated working pressure of hydraulic system————————————————————6.3MPa
Maximum axial force of oiler————————————————————68kN
Maximum tightening force of oiler on workpiece——————————————————20 kN
Drill box part (optional)
Drill box front end taper hole————————————————————————Φ120
Drill box spindle front end taper hole————————————————————Φ140 1:20
Drill box spindle speed range——————————————————————16～270r/min; 12 levels
Drill box motor power————————————————————————45KW
Post time: Oct-09-2024