The TS21300 machine tool is a heavy-duty deep hole processing machine tool that can complete the drilling, boring and trepanning of deep holes of large-diameter heavy parts. It is suitable for the processing of large oil cylinders, high-pressure boiler tubes, cast pipe molds, wind power main shafts, ship transmission shafts and nuclear power tubes. The machine tool adopts a high-low bed layout. The workpiece bed and cooling oil tank are installed lower than the carriage bed, which meets the requirements of clamping large-diameter workpieces and coolant reflux circulation. At the same time, the center height of the carriage bed is low, which ensures the stability of feeding. The machine tool is equipped with a drill rod box, which can be selected according to the actual processing conditions of the workpiece, and the drill rod can be rotated or fixed. It is a powerful heavy-duty deep hole processing equipment that integrates deep hole processing functions such as drilling, boring and trepanning.
Scope of work
Drilling diameter range——————————Φ160～Φ200mm
Boring diameter range——————————Φ200～Φ3000mm
Nesting diameter range——————————Φ200～Φ800mm
Drilling and boring depth range————————————0～25m
Workpiece length range——————————————2～25m
Chuck clamping diameter range————————Φ500～Φ3500mm
Workpiece roller clamping range————————Φ500～Φ3500mm
Headstock
Spindle center height—————————————————2150mm
Headstock spindle front end taper hole————————Φ140mm 1:20
Headstock spindle speed range————2.5～60r/min ; Second gear, stepless
Headstock box fast moving speed——————————————2m/min
Drill box
Spindle center height————————————————900mm
Drill box spindle hole diameter————————————Φ120mm
Drill box spindle front end taper hole————————Φ140mm 1:20
Drill box spindle speed range——————3～200r/min ; 3-speed stepless
Feed system
Feed speed range———————————2~1000mm/min; stepless
Drag plate fast moving speed——————————————2m/min
Motor
Servo spindle motor power———————————— 110kW
Drill rod box servo spindle motor power———————55kW/75kW optional
Hydraulic pump motor power———————————— 1.5kW
Headstock box moving motor power—————————————11kW
Drag plate feeding motor (AC servo)———————11kW, 70Nm
Cooling pump motor power—————————————22kW two groups
Machine tool motor total Power (approx.) ————————————240kW
Others
Workpiece guide rail width———————————————2200mm
Drill rod box guide rail width—————————————1250mm
Oiler reciprocating stroke—————————————250mm
Cooling system rated pressure—————————————1.5MPa
Cooling system maximum flow———————800L/min, steplessly adjustable
Hydraulic system rated working pressure——————————6.3MPa
Machine tool dimensions (approx.) ————————37m×7.6m×4.8m
Machine tool total weight (approx.) ——————————————160t
Post time: Sep-26-2024